Insignia Signs recently received a request for a new post & panel sign. The company recently purchased a building and needed to advertise space for lease - a post & panel sign works great for just that. The crew at this cmopany knew they needed an MDO sign but weren't sure of the size - they thought 5'x4' but then decided to go bigger and went with a 8'x4' sign. They decided on a vertical v-shaped sign. The company's design team sent print ready artwork to us and we printed directly from their file. The next step was to laminate the digital print with a UV laminate to protect the print outdoors. Insignia Signs uses a cold laminating process which is done using a 54" roll of Briteline UV lamination film. The digital print and lam film, which are both 54" wide, are fed through the laminator to create a cold, binding pressure, driving them to bond together to create a print that's ready to be applied to a substrate. Below is a picture of our laminator: Now that the (2) prints were ready to lay - we applied them to the 1/2" MDO. The sheets of MDO are primed & painted so the digital vinyl adheres strongly to the face. The company has ordered a V-Shaped sign, which is (2) single sided posts installed in the shape of a "V" with (3) posts - great for corner lots! The (2) signs were ready for installation. Dean went to the job site with the (2) 4x8 sheets, (3) posts, (1) bag of cement, paint, a bottle of water, and a hole digger. Before completing the install, Dean removed the existing 4'x4' V-Shaped sign which was in the location of the new sign. The sign was removed, cement was poured into the holes, and the new post & panel sign was installed. Once the (2) single sided signs were installed Dean painted the visible portions of the 4"x4" wood posts white to give them a finished look. A picture of the sign is below, you can see it from any angle of the intersection and this will allow them to STAND OUT! Post & Panel signs are a great way to get attention - give us a call today at (702) 444-7554 for more information!