How long do Ford brake rotors & pads endure?
Several pressures influence rotor and pad life. Rotors may be made of several steel alloys or constructed of composites like carbon fiber or ceramics. All have their pros and cons. Ceramic components are known to last longer. Inexpensive parts wear out more rapidly. How hard you use your brakes will have an important effect on brake longevity. A heavily loaded Edge will need a brake job sooner than a lightly loaded one. Ford brake pads require replacement every 30,000 – 60,000 miles, determined by these facts.
How about switching the brake pads only or only one wheel’s brakes?
Rotors last longer than brake pads, but you should replace both together. All-new brake components will work together better than partially worn-out components with new parts. When you brake, the pads leave some of their material on the rotors. Putting new pads on old rotors may result in inconsistent braking and another brake job sooner than you were hoping for. To prevent imbalanced braking, replace all of an axle’s brakes simultaneously. Front brakes perform virtually all the braking; they will need to be changed before the rear.
How can I identify if a brake inspection or fluid change is called for?
Getting a brake inspection is good to take care of problems before they become a safety issue.
Consistent brake fluid flushes can avert costly overhauls. Schedule brake fluid service every other year to avoid rusty brake components.
A good time for a brake inspection is every other tire rotation recommended by Ford every 5,000-7,500 miles. We will check the entire system during a brake inspection to ensure safety.
Indications of a required brake inspection:
- The brake pedal sinks closer to the floor than usual or needs more force than usual
- Unusual vibrations, shaking, or noises occur during braking
- Your car is wobbling or rocking
- Your dashboard Brake Warning Light comes on
- You have grinding, squeaking, or squealing brakes
- Your vehicle doesn’t stay straight when you brake, pulling in either direction
- It takes longer to stop than normal
- Brake inspections are recommended once a year. Alternating tire rotations is about right.
Following a brake inspection, recommended service may involve the following:
- Brake pad Replacement
- New Brake Rotors / Brake Drums Resurfaced
- Brake Fluid Flush & Brake Fluid Replacement
- Brake Rotor & Brake Caliper Alignment
- Brake Caliper Replacement
- New Brake Hoses/Brake Lines
- Brake Master Cylinder Replacement
Modern technology has supplied us with two of the best safety devices ever invented. Antilock braking, ABS, cycles the brakes many times per second to prevent wheel lockup. This results in shorter braking distances, making you less likely to have an accident. Stability control helps you to maintain control by noticing an incipient slide; automatically applying braking to some wheels to prevent loss of control. These devices rely on information from the wheel speed sensors. In performing a brake inspection on your Edge, the technician will assess whether these sensors work as specified by the factory. Our expert mechanic will adjust your emergency brakes. A road test will confirm that your Ford Edge brakes are factory fresh.
