Seeing fluid on the ground is a sign that something might be wrong with your vehicle. You don’t want to end up stuck on the road or damage your car further. In this case, we find that the oil leak is coming from the transmission pan, likely because it has rusted over time. You might think about just replacing the gasket, but this transmission pan is really corroded and close to breaking. So, you’ll need to replace the whole pan.
At Phoenix Auto, we supply reliable transmission and oil pans to facilitate such repairs. You should inspect beneath your car occasionally to avoid fluid leaks and ensure that it remains in good condition. When you require auto repair, look for certified shops with ASE-certified technicians. We have the capacity to provide you with complete inspection and break down the repair charges to you clearly.
It’s always best to know the DMV regulations for repairing and keeping a vehicle in order. While choosing a repair place, read customers’ feedback for excellent service. For extra peace of mind, swing by our shop at Phoenix Auto Repair when you’re in Nashville, Tennessee, and we will get your car running right!
How to Check the Condition of Your Oil and Transmission Pans
To check the condition of your oil pan and keep your vehicle healthy, you need to look closely at both the oil pan and the transmission pan. If we examine it a little closely, we will be able to observe that the engine oil pan is highly rusted. It’s so fragile that a very small stone can easily perforate it, which can damage the engine significantly. Maintenance of proper fluid levels will avoid engine damage and transmission internal issues. Periodic checks of the transmission pan and maintenance of your car fluids will save you from future costly repairs.
We definitely want to fix this issue before it gets worse, so we’ll replace it with quality parts from Phoenix Auto Repair. We offer a vast array of parts and ensure that all their customers get a fair price for every auto replacement. When you walk into an auto parts store or visit a licensed repair shop, remember your rights under repairs and warranties as dictated by the Federal Trade Commission. Not knowing where to start, look for an ASE-certified auto repair shop that guarantees their work with a warranty. You will surely be getting quality service while being secured with your investment in your vehicle.
How to Replace Oil or Transmission Pans
Oil or transmission pan replacements are relatively common repairs in cars; while the specifics will vary from car to car, over the course of repair, the steps followed are generally similar. Slip on your safety glasses and gloves before you begin!
Steps to Replace Oil or Transmission Pans
Remove Covers: Start by taking off any covers or panels blocking access to the pan.
Put Down a Drain Bucket: Place a bucket under the pan to catch any fluid that spills out.
Take Out Bolts: For the transmission pan, remove the bolts around its edges. Carefully Pry It Down: Gently pull the pan down, being careful not to spill too much fluid.
Scrape Off Old Gasket Material: Make sure to scrape off any old gasket material carefully.
Change the Filter if Needed: Sometimes, you can also replace a filter while you’re at it. It’s a good idea to install a new filter with the pan.
Clean and Dry Everything: After cleaning up, use gasket maker or an appropriate gasket for a good seal when putting the new pan back on.
Secure the New Pan: Once you have your new pan installed, check fluid levels and ensure all is well.
When to Get Professional Assistance
If you’re not sure about any of this or something does not go according to plan, it is safer to go to a professional car repair shop. Trained car mechanics can test to determine the issue and ensure that your vehicle is running as it should.
How to Replenish Transmission Fluid Tips
Transmissions have to know what to fill with. Check your owner’s manual at all times so you put in the proper type of fluid and find out how to get it checked.
- Warm Up the Engine Most vehicles require that you warm up the engine first before checking. This will give you a proper reading when you check the fluid. Drive the car until it’s warm, then shift from Park, through Drive, into Reverse, and back to Park.
- Check the Dipstick Remove the dipstick and wipe it with a rag, then replace it and pull it out once more. Ensure the fluid level is at or above the lines. If you do, you’re good to go.
- Check for Rust While you’re examining, keep an eye out for rust. Surface rust may appear to be nothing but could be an indication that there are larger issues. The metal may be thinner in spots, and rust will lead to leaks if not patched up correctly.
- Replace a New Pan if Necessary If you require a new pan that does not rust, it will be helpful in preventing leaks.
Always remember that car maintenance is crucial for longevity. Schedule service sessions in advance! If approval for significant repairs is required, being aware of the price upfront will save you time and money. So give us at Phoenix Auto Repair a call today to schedule your professional auto repair services at (615) 866-9199!
