Are you tired of the increasing cost of repairing frequent mold damage?
The undetected growth of mold in your home can have far-reaching consequences. Since the mold spores spread around easily, it is challenging to get rid of them completely.
The help of a professional only delays the inevitable as often time the mold reappears.
Here are some tips that you can follow to prevent the reappearance of mold.
Control the indoor climate
Mold problems are a common occurrence during hot and humid weather. The hot weather outside and the cold climate indoors results in water vapor condensation.
Moisture problems then lead to the creation of mold, which often develops undetected. You can maximize the efficiency of energy indoors by setting the thermostat at 78 degrees Fahrenheit.
Identify areas of concern in your house and go about fixing them
While it is impossible to make a mold-proof home, you can take measures to ensure that it is mold-resistant. A brief internal audit will help you in discovering areas of concern that aid the development of mold.
Look for signs of condensation and water stains on the windows. Install mold-resistant products and repair gutters that are damaged. Look to clear all doubts, and if the problem still persists, try calling for a major excavation or waterproofing.
Dry all wet areas
Moisture is a major determinant of mold creation. To fight its development, you need to tackle all the wet areas immediately. Heavy rainfall can result in unnoticed seepage in the basement. You should ensure that all your furniture and fixtures are safe from the mold while clearing the area.
Even the minor everyday occurrences need your immediate attention. Don’t ignore wet items that are lying around the house and ensure that you dry the walls and the floor after a shower.
Wet clothes in the washing machine can also lead to the development of mold. Hang them to dry outdoors, especially in areas with great air circulation.
Get a proper sized ac unit
Ensure that your air conditioning unit is sized correctly. A small unit will continuously run at high temperatures and increase the energy bills. A unit that is too big will operate in an inefficient manner that can waste energy.
Install an HVAC unit that is just about right for your indoor energy requirements. Call a professional to get proper guidance on the matter.
Other methods you can try
Here are some other methods that you can implement to rid your home from the curse of mold and mildew.
Clean the fabrics consistently and ensure that they stay dry at all times. Consider using dehumidifiers’ fans and keeping the windows open to reduce the formation of moisture. Stay specifically alert during the months of heat and humidity.
Also, stay alert to the possible areas of concern, taking immediate action once you see a problem developing.
Don’t forget to store items in areas where they can stay dry and are well-ventilated.
Click here to get in touch with a professional service that can help you in getting rid of the mold.
