Anita came to us and wanted a custom sign/road sign they also wanted a reader board. To process the custom sign/road sign, we used two pieces of 1 inch PVC. We put it together to make the face, and trimmed it with Rams Head Crown Molding. The post was 6 inch by 6 inch by 12 feet. The posts were cemented into the ground, and we stained the post white.  The letters on the custom sign/ road sign were cut out of black vinyl. To cut the individual letters and numbers out we used our plotter. We then had to weed the letters (take the excess vinyl material of), and put application tape over it.  To install, we used masking tape to hold the letters in place, we peeled back the backing paper and then we applied the letters to the custom sign/road sign with the mighty squeegee. After we made the custom sign/road sign we installed the sign. The custom sign/road sign was installed in front of the library which is a historical district. After the custom sign/road sign was installed, we then installed the reader board. The reader board includes letters and numbers so the librarian can write activities on the board. The Reader Board is a cabinet sign, which has tracks to put up letters and numbers to change the message.

Anita loved the work we have done.  For more information on Custom Sign/Road Sign contact Unlimited Signs, Designs and Graphics at 203-546-7267.  Or check out our website at www.unltdsigns.com