Fausto the owner wanted his awning lettered. To do the process of the custom sign/awning lettering we need to measure the awning. The awning is 25 feet wide and we needed to center the letters so the letters will look even and centered.  We had to go on a 15 feet ladder to apply the vinyl.  After completing the measurement of the awning and where to place the letters, we then applied the letters. Since the letters are in one color we used our plotter to cut the individual letters. After the letters are cut, we then had to weed the letters (take the excess vinyl material off), and put application tape over it.  To install, we used masking tape to hold lettering in place, we peeled back the backing paper and then we applied the letters to the custom sign/awning lettering with the mighty squeegee.

Fausto loved the job we did. For more information on Custom Sign/Awning Lettering, contact Unlimited Signs, Designs and Graphics at 203-546-7267.  Or check out our website at www.unltdsigns.com