Bill is also our landlord; he came to us and asked if we could update the original custom sign/directory sign. Of course we said yes.  To process the custom sign/ directory sign we need to see how many suites or units we have in the industrial park.  Each unit/suite need to be measured the exact same. Once we established the units/suites we then decided how big the directory sign should be.  To do the process we use a 4x8 feet aluminum material for the custom sign/ directory sign face.  Each individual 13 suites/units we made 4 inches using cut vinyl letters with colors of white for the letters and black for the lines to separate the units/suites. To cut the letters we used our plotter.  The plotter will then cut the vinyl material in specific section, and then we have to weed out the material, and put application tape over it.  We then double check the location and we installed with our mighty squeegee. To avoid vandalism and to protect the custom sign/directory sign from dirt, wind and erosion, we used Lexan material to cover the custom sign/directory sign.

Bill l liked the work we have done.  For more information on Custom Sign/Directory Sign, contact Unlimited Signs, Designs and Graphics at 203-546-7267.  Or check out our website at www.unltdsigns.com