Want to keep excess moisture out of your house? Get professional crawlspace encapsulation services by STOP Restoration of Chesterfield, VA! Crawlspace is a hollow and narrow space under a floor or roof which gives space to wiring or plumbing. It is handy to install any HVAC piping and units in your crawlspace since it makes electrical and plumbing repairs much easier. Another purpose that a crawlspace serves is ventilation. A crawlspace allows outside air to come inside for ventilation purposes. This may seem good for the air quality of your home, but excess moisture in the air can actually degrade the quality of the air coming into your home. Crawlspaces are prone to termite infestation, wood rot, and, most importantly, mold growth. Therefore, if you have a crawlspace in your home, you should consider encapsulation or dehumidifying techniques to keep mold and rot away. If you want to encapsulate your crawlspace, you should look for professionals who have ample experience in protecting crawlspaces effectively. Encapsulated crawlspaces are more likely to protect your home from molds and pests and keep your HVAC components dry and free of moisture. You will incur lower energy bills with encapsulation as cold air stops rising from your floor in the winter. How Does Crawlspace Encapsulation Work? Crawlspace encapsulation can make your crawlspace into a clean and dry environment for healthier air quality and living conditions.

• Analysis of the Crawlspace

When you contact a professional for crawlspace encapsulation of your home or building, the expert will make a full analysis of the condition of your crawlspace before moving directly to encapsulation. It is important to check for drainage issues. Drainage issues can cause water to seep into your crawlspace, increasing the moisture level of the space. It is also necessary to tend to any potential backdraft carbon monoxide from your heating system. Any molding in the space should also be addressed before the installation of any protective barrier.

• Encapsulation of the Crawlspace

After your crawlspace has been deemed ready for encapsulation, experts will suggest installing a plastic barrier for protection against humidity and moisture. This plastic vapor barrier will go against your foundation walls, equipment, water heater, and handler. All of this is done to seal off all crawlspace equipment from any moisture from the ground below. Your encapsulation professional may also seal off any openings to the outdoors with foam board to keep humid air from outside entering from any vents or spaces.

• Dehumidification of the Crawlspace

Encapsulation alone is not enough to keep the humidity in the air from transforming into mold formation or wood rot. To keep the crawlspace under your home completely dry and clean, you should look into installing a dehumidifier. By installing a dehumidifier in your crawlspace, humid air in the space drains directly to the outdoors. Along with dehumidifiers, it is also preferable to opt for humidity sensors to check the levels of humidity in your crawlspace. Call STOP Restoration of Chesterfield, VA Today! Crawlspace encapsulation professionals at STOP Restoration of Chesterfield, VA have years of experience dealing with mold elimination and crawlspace encapsulation.Call us today to book a consultation with the most thorough professionals.