We were contacted by PolySource, a plastics design company to help them with their interior and exterior signage for their new location. They needed a little bit of everything inside and out, so we got to work designing an easy-to-recognize, clean and cohesive look. 
PolySource, based in Independence, Mo., prides itself on being a thermoplastic resin and compound distributor that puts customer service first and focuses on partnerships and relationships. It was an honor to work with the staff to deliver signage that reflects their mission.
When you move into an old building, you have to remove the old signage before installing the new. Once that was done, we started with the door graphics.
We Designed, Produced and Installed two (2) sets of 3M IJ35C door graphics using Brightline Shield Overlaminate. To ensure their logo stands out, we Designed, Produced and Installed an Avery Frost reverse-cut logo for the window facing the lobby.
And since the l
obby is the first point of impression for their visitors, we wanted the look to be sleek, classy and inviting all at the same time. To accomplish this, we Designed, Manufactured and Installed ¼” Dimensional Acrylic, Brushed Aluminum Face and 3M IJ35C Print/Cut Graphics for their Lobby Sign.
How do you know you’re at the right place? By looking at the address! We made theirs pop by Designing, Manufacturing and Installing ¼” Dimensional Acrylic 4” tall address numbers! But we also needed the outside look to match the interior. So, we Designed, Manufactured and Installed Painted Exterior ¼” Aluminum Signage and mounted it to their brick façade.
Next, we had to remove the old tenant’s monument sign footing and base to make room for their new, high-quality sign. We Designed, Manufactured and Installed a Non-Illuminated Peachtree City Foamcraft Monument Sign with two (2) tenant panels which stood off with 3M IJC35C Printed Graphics and Brightline Shield Overlaminate.
We custom cut the Foamcore sign panels from a solid block of expanded polystyrene and then encapsulated it in hybrid Poly-Armor™ hard coat. We then sprayed the sign with a 100% acrylic, light stucco-textured finish.
Thank you PolySource for trusting Forerunner Signs & Graphics with your interior and exterior signage needs! If you are looking for signage for your business – new, replaced or repaired – contact us today!
