Apache Junction, AZ – Useful Tips for Preventing Your Home from Mold Infestation

Looking for Tips to Avoid Mold Infestation?

Call STOP Restoration Services of Mesa now!

Mold is more than simply a nuisance in more than half of all U.S. houses. Mold exposure may cause serious and even life-threatening health problems. That’s only one of the many reasons why mold should be taken care of by homeowners. It’s possible to lose thousands of dollars in renovation costs if the mold infestation is severe. The good news is that mold may be avoided with a few simple precautions.

Tips for Preventing Home from Mold Infestation

1. Indoor Humidity Measurement

Moisture is necessary for mold to thrive. Water from spills and leaks is one cause of excess moisture in a building, but they are not the only ones. Mold development is greatly aided by high levels of relative humidity and vaporized water in the air. For those who have found mold, or are concerned about the infestation, a hygrometer is a must-have item. To prevent the formation of mold, the EPA advises a humidity level between 35 and 55 percent. Mold may develop in your house if the relative humidity is higher than 60%.

2. Make Sure the Windows Are Open

Mold can only be stopped if there is enough ventilation. Water vapor can only be held in the air for a certain length of time. Water may condense as a result of temperature changes. As a result, you’ll likely see water beading up on the windows and walls of your house. Proper ventilation in your house may help avoid this. Your house will benefit greatly from having its windows open as this will allow fresh air to circulate.

3. Use Exhaust Fans

A kitchen exhaust fan and a master bathroom exhaust fan are standard in almost every house. Ventilation is the primary purpose of these devices. Boiling water calls for the use of an exhaust fan in the kitchen. If you don’t, your house will fill up with more water vapor. This may adhere to the walls in the kitchen, which encourages mold development and raises the humidity level in the house.

4. Check Outdoor Drainage

Pay attention to the water’s drainage system and avoid wasting water. If your house is built on a little slope, water will naturally flow away from it. If water accumulates in and around your house, it may result in mold growth. When it comes to mold, basements have a reputation as a breeding ground for fungus. If you suspect a drainage problem, get a professional from STOP Restoration Services of Mesa to come in and do an inspection of your property.

5. Leaks Need To Be Fixed

Keeping an eye on your home’s plumbing is a wise idea. It is possible to have a major mold issue even with little leaks. You should inspect your home’s open pipes at least several times a month for leaks, which are one of the most common sources of mold in the home.

Hire STOP Restoration Services of Mesa for Mold Remediation & Removal

Getting rid of mold isn’t a simple task. For effective and safe mold removal, you’ll need staff with the right training and experience. A Mesa, AZ, mold remediation company, STOP Restoration Services of Mesa, is well-equipped to tackle any mold problem. Their mold removal experts have received thorough training and use cutting-edge technology to resolve mold infestation. So, if you need mold removal, call STOP Restoration Services of Mesa right now! They cover the Mesa, Tempe, Apache Junction, and other Phoenix-area cities. #stopmes #molddamage #moldremediation