TYPICAL BANNER FINISHING OPTIONS - What will work for you? GROMMETS: Provide a convenient method for attaching the banner at regular points. This distributes the banner's weight and helps to keep the banner from sagging. Grommets are the most common method to hang banners. HEMMED EDGES: Hemmed edges are typically used to reinforce the sides of vinyl banners, helping maintain the banner's shape and prevent stretching. POLE POCKETS: Pole pockets allow for rigid poles to be inserted along the edges of the banner. This allows for a more even distribution of the banner's weight to prevent sagging. Opposing pole pockets can also be used to make the banner more rigid. POWER TAPE: Power tape reinforces the edges of shear cut banners or banners that have no material available for hemmed edges. BANNER-UPS: A plastic tab with eyelet attached to each corner of the banner. This creates convenient attachment points to have a banner. D-RINGS WITH NYLON WEBBING: D-Rings with nylon webbing are typically sewn into large banners that will hang on buildings. The D-rings allow the banner to be secured with ratchet straps. NYLON WEBBING: Webbing sewn into the top and bottom makes the banner stronger and significantly extends banner life. Webbing is typically used in areas subjected to higher wind loads. If you have any questions, please give us a call at The Sign Studio -  (818) 843-9200 or e-mail us at thesignstudio@sbcglobal.net. NEED QUOTE