Whether you use your garage for your vehicle, as a utility room, or as storage, it might be harboring mold.Contact your local mold remediation company for inspection.
Residential garages are often damp and dark and don’t have proper ventilation. In many cases, they’re subject to a lot of clutter. All these aspects make garages a perfect breeding ground for mold.
Plus, if you continue to ignore mold presence, it can spread to other areas of your home. The invisible mold spores that travel through the air pollute the indoor air quality. When that happens, mold can become a health hazard, and no one in your home will be safe from the dangers associated with it.
Let’s take a look at some reasons why garages are susceptible to mold and what you can do to address the problem.
Water Intrusion and Damage
There are many sources through which water enters garages. The most common way is through your vehicle. When you arrive home and park your car in the garage after driving in the rain, moisture on the vehicle will drip on the garage floor and pile up.
The damp equipment and materials stored in the garage are other culprits that can release moisture in the space. When the gap between the garage door and the floor is not properly sealed, rainwater will enter from there. Regardless of the source, unremoved water leads to water damage in the garage, which exacerbates mold damage in just two days.
On top of that, if you wash your car in the garage, a lot of water will accumulate in the space. Taking the necessary steps to avoid water intrusion and damage is one of the most effective ways to prevent garage mold.
Most Garages Use Concrete and Paint
While most garages have concrete floors and paint on walls, they are not resistant to mold. Keep in mind that concrete surfaces often develop stains and mineral coatings that trigger mold growth. Thus, concrete doesn’t directly attract mold, but the developments on concrete surfaces can indirectly result in a mold infestation. As far as paint is concerned, most types remain susceptible to mold.
Hence, to prevent mold infestation, be sure to regularly clean concrete floors in your garage and consider replacing your traditional paint with mold-resistant paint.
Ideally, the indoor relative humidity (RH) should be between 30% and 50%. Because garages attract a lot of moisture, they are often subject to higher humidity levels. With poor ventilation, the water vapor in the garage air supplies enough moisture to support mold growth.
To control humidity levels, ensure proper air ventilation by installing vents and fans in your garage.
Contact Your Local Mold Removal Company
Now that you’re aware of the most common causes of mold in the garage, it’s time to take remedial steps. If you suspect mold presence in your garage, seek professional mold inspection and restoration services to address the problem.