Are you looking for custom ADA-compliant signs? Contact us at QC signs!
The Americans with Disability Act, or the ADA, was passed as a law in 1990. This act aims to ensure that public spaces and buildings are more inclusive and accessible to people with disabilities. In order for a sign to be ADA-compliant, its design needs to fulfill certain regulations. These design regulations ensure that the signs are visible for all.
One of the primary regulations is that the sign should be designed in Braille. It must use highly contrasting colors. The letters of ADA-compliant signs need to be raised so people with visual impairments and disabilities can comprehend them. Reach out to your local sign company for customized ADA-compliant signs now!
The ADA regulations need to be followed by all the signs that display information, directions, and other important notices. All the elevator signs, handicap parking signs, etc. are required to comply with the ADA standards. The ADA regulations specify the sizes, installment methods, and placement requirements for signs. Let’s learn about them in detail below!
Who Needs ADA-Comliant Signs?
ADA-compliant signs are a mandatory requirement for public spaces that are designed for long-term or permanent use. Any functional area in a building or public space that will be in public use for more than 7 days needs to have ADA-compliant signs.
Here are a few guidelines that clarify ADA requirements and exemptions:
- ADA-compliant signs are not legally required in places set for less than 7 days of use.
- All the areas which are not open to public use and the areas that display the name or address of the business outside are also exempted from this requirement.
- There is no requirement for ADA-compliant signs in parking lots, except for the ones that have designated and accessible parking spaces.
- ADA-compliant signs are mandatory for areas that relate to safety, such as fire exits, elevators, and stairways.
- All areas in a building that have signs representing non-essential information are exempted from the requirement of ADA-compliance.
What is the Correct Way to Install ADA-Compliant Signs?
The proper installation of ADA-compliant signs is just as important as the design of the signs. The ADA includes the guidelines for the placement of signs, which you can read below:
- The ADA-compliant signs with raised letters and Braille must be installed on the side with the door latch for identifying a room.
- Install the ADA signs at a height no lower than 48 inches and no higher than 60 inches from the ground.
- Do not mount ADA-compliant signs directly on the doors.
- If there’s no room for the sign to be installed on the specified location, you can install it on the nearest adjacent wall that is in direct sight.