Are you a proud Mercedes Benz enthusiast? Then do not ignore the following fuel injection issues.

The fuel injection is a crucial component of automotive engineering. A fuel injection is what enhances the fuel efficiency of your car and reduces pollution. Therefore, your car’s fuel injection should always be in great condition. However, identifying the problem with your car’s fuel injection isn’t easy. In the following paragraphs, we will take a look at some of the common fuel injection problems.

So, let’s begin.

Clogged Fuel Injections

One of the common fuel injection problems is clogging. The clogging usually takes place because of the rust buildup within your fuel injection. A source upstream in the fuel supply is what causes the rust buildup. Furthermore, if you don’t drive around frequently and the car stays idle, you will end up with a clogged fuel injection.

Dirty Fuel Injectors

The rapid movement in your fuel injectors often results in friction, which is why they tend to heat up. As a result, the fuel additives are kept from being sprayed into the intake manifold. Hence, they tend to leave residue on the fuel injectors, and with time, the residue tends to heat up and become rusty. This results in a weaker spray, and an uneven pattern.

Inability to Open the Injector

Fuel injectors may refuse to open up. There are several reasons why a fuel injector may be stuck. Some of those reasons include faulty windings as well as rusting. Remember, if your fuel injection fails to open, it won’t be able to do what it is supposed to do, and that is to deliver fuel through the nozzle.

Inability to Close the Injector

A faulty fuel injection isn’t only difficult to open; it is also difficult to close. This primarily happens due to the fuel additives and rust buildup. As a result, the fuel injector becomes difficult to close, which further leads to a petrol leak.

Leaking Fuel Injector

A leak in the fuel injection can cause poor performance. In such cases, your car’s fuel consumption increases, and you have a hard time starting the car.

Sometimes, a problem is there but you can’t figure it out. When that happens, you must watch out for the following symptoms.

• A common symptom of fuel injection failure is misfiring. Clogs in your fuel injection can impede the supply of fuel, which results in misfiring upon ignition.
• Another symptom of fuel injection failure is reduced fuel efficiency. In the case of fuel leakage, your car starts consuming too much fuel, which can affect your bills.
• If you smell a very sharp stench of petrol,make sure you get your fuel injection checked. The smell of fuel is a sign that there is a leak.

Fuel injectors are an important part of your vehicle. If you face any of the problems mentioned above, you should contact an auto repair shop immediately. For the best auto repair services in Berkeley, CA, feel free to visit our website today.