Holly Denise called us and wanted the Company’s Recreational Vehicle car decals/recreational vehicle graphics. The 1994 RV was donated and they wanted us to remove the existing graphics and put their logo and graphics on it. To do the process of removing the car decals/recreational vehicle graphics we use acetone and a special vehicle scrapper. The acetone is a glue remover and the special vehicle scrapper will help scrape the vinyl material off, without damaging the vehicles paint. It took several hours to scrap off the existing graphics because it was on since 1994. To do the process of car decals/ recreational vehicle graphics, we measured the Recreational Vehicle first and marked out the position of the windows. Once we establish the measurement, we print the car decals/ recreational vehicle graphics on our printer since the colors are multi-colors. Our colors are from the x-Rite Color Management System. Some of the lettering was only 1 color, so we also used our vinyl cutter, to cut out those letters. To install, use masking tape to hold the special vehicle graphics in place, peel back the backing paper and then apply the special vehicle vinyl to the recreational vehicle with the mighty squeegee. It took 6 hours to apply the special vehicle vinyl.
Holly Denise was very excited about the job we did. If you are interested in Car Decals/ Recreational Vehicle Graphics, Unlimited Signs, Designs and graphics can help you. Please visit our website at www.unltdsigns.com or contact us at 203-546-7267.