Mustang Parts – Billet Adjustable Fuel Regulator (94-98)
June 28, 2010
When you are having fuel issues, then a new after-market regulator could be the answer. This fuel regulator is made out of billet aluminum, and is very sturdy under high pressure. This Kirban Performance fuel pressure regulator is also fully adjustable from 30-100 psi. It is made from all new parts and has two O-rings internally, so it will never leak. Any adjustments can easily be made without removing the vacuum line since the adjustment is a separate port on the top. Fits 94-95 Mustang 5.0, 94-96 5.8, 96-97 4.6 (2V & 4V), 98 (4V), and 94-98 3.8 Check it out today!
Click here to view or purchase product:
Mustang Parts – Venom High Performance Fuel Injectors 42lb
June 21, 2010
If your looking to increase your horsepower through your throttle body, then look no further. A new clean set of good fuel injectors may be what your looking for.
Give your engine a horsepower boost. Python high performance injectors have a 10 percent higher flow rate than your stock injectors, so they boost horsepower without creating an overly rich fuel mixture. As a result, they enhance overall performance while maintaining an optimal idle condition.
Fuel Injectors, 42 lbs./hr. Set of 8 to help bring your stang up to maximum horsepower performance!
Click here to view, or purchase product:
Mustang Parts – Ford Racing 4.6L Performance Improvment Intake Manifold
June 14, 2010
One of the problems that I have discovered with the composite manifolds that Ford puts on it’s 4.6 Litre engine, is that under extreme pressure, and usage, they tend to crack over time sometimes. Fortunately all is not lost if this happens. It is a relatively easy fix for the shade tree mechanic.
This is the same exact production intake manifold used by Ford on the 2001 to 2004 4.6L SOHC 2V V8 GT Mustangs. It is less expensive and a great alternative to high dollar aftermarket performance intake manifolds when performing a PI head swap on you stang.
The application for this head is easy! This Ford Racing Performance Improvement (PI) Intake Manifold is a direct fit on 1999-2004 4.6L GT Mustangs with PI head ports. It can also be used on 1996-1998 4.6L engines with PI heads, with additional parts and modifications required.
One thing that is important to note however is that 1999 and 2000 GT Mustangs will require the use of an alternator bracket from a 2001-2004 GT. This head can be a great replacement manifold, or it can be a good part for swapping. You decide. Click here to view or purchase product:
Mustang Parts – Mustang Dash Gauge Pod (05-09)
June 6, 2010
Need to have a few extra gauges for cooling, amps, etc? Then a 3 gauge pod may be what your after. The Concept 1 Mustang Dash Gauge Pod is a sleek way to add three extra gauges to your 2005+ Pony without blocking your field of vision. This Mustang Dash Gauge Pod is designed to accept three 2 1/16″ diameter aftermarket gauges (not included) and mounts in the center of your dash. The Center Dash Gauge Pod is dark charcoal in color with the factory-correct texture so that it blends seamlessly into you Pony’s interior.
Click here to veiw or purchase product: http://www.musclemustangparts.com/store-products-81005-Mustang-Dash-Gauge-Pod-%2805-09%29_41737629.html
